The common problem encountered in the bending machine is the occurrence of noise, and the cause of this problem is also very simple, which is caused by the excessive gap between the slider and the guide rail of the bending machine. Once a similar situation occurs, the first thing to consider is whether the guide rail pressure plate should be replaced. When replacing it, the gap between the slider and the guide rail should also be readjusted to achieve the best condition. If the bending machine uses a hydraulic system, the problem encountered is the loss of pressure in the system.
However, once it occurs, the cause should be found as soon as possible and solved accordingly. First, check the sandwich valve of the bending machine to see if it is stuck. If it is, just remove it and clean it. However, it is also possible that the problem is caused by the too fast return speed of the slider of the bending machine, and then the problem lies with the filling valve. The bending machine is one of the commonly used equipment in the bending process of the product processing industry. With it, the bending process in the operation can be completed efficiently, and the production efficiency is improved while the bending error is also greatly reduced. Compared with manual bending, the advantages of bending machine are very obvious.